TIMBER
GLULAM
Manufacture of Ukraine

All advantages of glued laminated timber (Glulam) can be explained by the process of its production, which consists of several stages – wood filtration, automated drying, removal of defects, gluing lamella into the beam, profiling and peeling of the beam, covering with antiseptics. The company “Derevianyi Dim LLC” (Lviv) at its own production facilities in Yavoriv carries out a full range of works on the production of profiled glued timber.
GLUED LAMINATED TIMBER (GLULAM)
The company “Derevianyi Dim LLC” offers Glued laminated timber (glulam) of its own production of the following sizes:
– Glued laminated timber (glulam) 95 x 150 x 12000 mm
– Glued laminated timber (glulam) 150 x 150 x 12000 mm
– Glued laminated timber (glulam) 180 x 150 x 12000 mm
– Custom sizes may be different
Advantages of Glued laminated timber (glulam) compared with the usual following:
Glued laminated timber (glulam) is not cracked due to thorough drying of wood and the absence of internal stresses
Not twisted due to the correct combination of lamellae, which counteracts their deformation
Glued timber (glulam) provides high strength due to the fact that the fibers of wood during gluing are located in different directions.
Glued timber (glulam) gives a minimum shrinkage of less than 1%
This is a finished facade material that does not require additional finishing work
Protected from rot and pests due to antiseptics
Provides perfect thermal insulation and optimal microclimate inside the premises
Glued timber (glulam) is a high-tech building material, it is natural ecological and durable.

GLULAM BEAMS / GLUED TIMBER BEAMS
The company “Derevianyi Dim LLC” offers glulam beams / glued timber beams of its own production.
The standard split of glulam beams is 120 – 220 mm. Length up to 12 meters.
Custom sizes may be different.
Glulam beams have the same benefits as glued timber, as the manufacturing technology is the same.
Glulam beams do not twist, do not crack, provide high strength, do not shrink.
Glulam beams are used as bearing structures of overlappings, floorings of coatings, rafters, walls, working platforms and other wooden constructions.

FALSE TIMBER
The company “Derevianyi Dim LLC” offers a false timber (imitation of a beam) of its own production.
The standard sizes are as follows:
– False timber jointed 24 x 150 x 6000 mm
– False timber not jointed 24 x 150 x 3000 mm
Custom sizes may be different.

BLOCK HOUSE
Our company offers a block house of its own production:
– Block house jointed 50 x 150 x 12000 mm
Custom sizes may be different.
It is one of the types of lining, which is used as a finishing material for interior and exterior finishing, and imitates a cylindrical deck.

LINING BOARDS
The company “Derevianyi Dim LLC” offers lining boards of its own production:
– lining boards jointed 12-14 x 98 x 6000 mm
– lining boards not jointed 12-14 x 98 x 3000 mm
Custom sizes may be different.
Used as finishing material for interior and exterior furnish of houses, lintels, loggia, baths, mansard, etc.

FLOOR BOARDS
The company “Derevianyi Dim LLC” offers a floor board for its own production.
The standard sizes are as follows:
– The floor board jointed 30 x 100 x 6000 mm
– The floor board not jointed 30 x 100 x 3000 mm
Custom sizes may be different.
